Equipment

101 Impeller Packer

Description
 

This machine is designed for heavy sanded and abrasive products such as stucco. It is constructed using cast steel components and comes standard with an abrasive ware package. It fills and weighs the bag by using a mechanical beam scale or electronic weigh system. Available in one to three packer station.

Standard Features
  • Manual Start
  • Automatic Stop
  • Automatic Bag Clamp
  • Manual Bag Discharge
  • Mechanical Scale Beam Weighing
  • Dust Collector Hood
  • Abrasive Ware Package
  • Motor Control with Start/Stop
Optional Features
  • Automatic Bag Start
  • Automatic Bag Discharge
  • Electronic Weigh System
  • Transition Hopper
  • Maintenance Slide Gate
Applications
 

Products using up to 60% of 16 mesh sand. These include stucco, heavy grouts and various coatings.


201 Force Flow Air Packer
Description
 

The Force Flow design is for non abrasive granular or powder products. It uses a low pressure high volume blower to fluidize the chamber and blow product into the bag. Depending on product characteristics this packer is available with any combination of top and bottom air. Available in one to three packer station.

Standard Features
  • Manual Start
  • Automatic Stop
  • Automatic Bag Clamp
  • Manual Bag Discharge Chair
  • Mechanical Scale Beam Weighing
  • Dust Collector Hood
  • All Pneumatic Controls, Including Filter / Regulator
Optional Features
  • Automatic Bag Start
  • Automatic Bag Discharge Chair
  • Electronic Weighing System
  • Stainless Steel All Product Contact
  • Casters for Portability
Applications
 

For non abrasive granular product and powdered products that are free flowing.


201 Plug Stack Air Packer

Description
 

This air packer is for abrasive granular products or any mix product that has a high abrasive factor. It requires a constant head of material and operates the same as the Force Flow using a low pressure high volume blower. Available in one to three packer station.

Standard Features
  • Manual Start
  • Automatic Stop
  • Abrasive Wear Package
  • Automatic Bag Clamp
  • Manual Bag Discharge Chair
  • Mechanical Scale Beam Weighing
  • Dust Collector Hood
  • All Pneumatic Controls, Including Filter / Regulator
Optional Features
  • Automatic Bag Start
  • Automatic Bag Discharge Chair
  • Electronic Weighing System
  • Dust Collector Manifold
  • Stainless Steel All Product Contact
  • Casters for Portability
  • Maintenance Slide Gate
    *Image shown with optional maintenance slide gate.

Applications
 

For abrasive products up to 3/8 inch. Includes products such as dry mix concrete, mortar mix, silica sands and products using high percentage of 12 mesh aggregate or larger.


401 Impeller Packer

Description
 

This machine is designed for a very wide range of powder products. It can be used on light material with a bulk density as low as 20lbs. per cu. ft. to over 100lbs. per cu. ft.. Particle size can range from 150 mesh to over 400 mesh. It also has a abrasive ware package available that makes it ideal for sanded products using 20 mesh sand or smaller. Available in one to three packer station.

Standard Features
  • Manual Start
  • Automatic Stop
  • Automatic Bag Clamp
  • Manual Bag Discharge Chair
  • Removable Bottom Hopper Door for Hopper Clean Out and Maintenance
  • Mechanical Scale Beam Weighing
  • Dust Collector Hood
  • All Pneumatic Controls, Including Filter / Regulator
Optional Features
  • Automatic Bag Start
  • Automatic Bag Discharge Chair
  • Electronic Weigh System
  • Dust Collector Manifold
  • Abrasive Wear Package
  • Stainless Steel All Product Contact
  • Transition Product In feed Hoppers
  • Casters for Portability
  • Maintenance Slide Gatev
Applications
 

For a very wide variety of products, ranging from low bulk density powder to high bulk density powder. Works well on sanded products such as tile grout, thin set and patching material using 20 mesh or smaller sand.